-
2023-05-16
The test box should be cleaned of impurities inside before use, and the distribution room should also be cleaned at least once a year to maintain cleanliness inside and outside the constant temperatur
-
2022-04-11
Water jacket carbon dioxide incubator refers to a material that relies on heated water inside the chamber wall to maintain a uniform temperature throughout the incubator. Due to the high thermal capac
-
2022-02-21
1、 Firstly, it should be a heating tube. You can use a multimeter to adjust it to the Ohm gear and measure the resistance value at both ends of the heating tube to see if there is an open circuit or l
-
2021-10-17
When using a box type resistance furnace for the first time or reusing it after long-term shutdown, it is necessary to dry the furnace in advance, otherwise it may easily cause furnace cracking.When u
-
2020-01-18
When using ultrapure water equipment, if there is minimal maintenance and upkeep, it can lead to equipment failure. So the editor of this article will talk about how to maintain ultrapure water equipm
-
2019-08-30
When preparing ultrapure water, the following points should be noted:1. To produce ultra pure water, it should be prepared and used as needed to ensure the best water quality, as the water quality wil
-
2019-02-26
The reasons for the decrease in water quality of ultra pure water equipment during use are as follows:1. Pretreatment filter element: Some users use raw water with poor quality, with a large amount of
-
2019-01-16
Low speed centrifuge:Low speed centrifuge refers to a centrifuge with a speed less than 10000 rpm, which can be widely used in clinical medicine, biochemistry, immunology, blood stations, and other fi
-
2018-07-18
After operating the ultrafiltration equipment for a period of time, the ultrafiltration membrane will be contaminated to varying degrees, and it is necessary to clean the ultrafiltration membrane to e
-
2018-04-21
Ultra pure water machines are commonly used in laboratory water to solve raw water quality problems. But any device will inevitably encounter such problems. So what is the reason for the power failure